On April 7, 2008 at 10:14, Ericjb said...
Yes, the RFX-250 or RFX-150 is the RF receiver,
if you remove the RFX-150 and install an RFX-250 you have
made your MRF-300, MSC-400, etc narrowband because you
have changed the RF receiver. All the RFX sends out to
the MRF/MSC is the command with the routing info and ID
still attached. All RF reception and processing is done
in the RFX, then the command is sent to the MRF/MSC.
I have 20+ MRF-300s out there that we upgraded to RFX-250s
and they all work perfectly now.
That is the answer that I wanted to hear! I was 80% sure on that, but just wanted to hear it from someone else.
Thanks.