|
|
|
The following page was printed from RemoteCentral.com:
Presetting volume on MX-980
| |
|
Topic: | Presetting volume on MX-980 This thread has 11 replies. Displaying all posts. |
|
Post 1 made on Thursday January 31, 2008 at 20:51 |
bleemo Long Time Member |
Joined: Posts: | October 2007 19 |
|
|
Is there any way to set the volume at a certain level when a button is pushed?
For example, I have one device that seems to require a higher volume level. I'd like to start off this device at a higher volume when that device's button is selected.
I'd also like to ensure that when someone switches to an audio device it is not at a very high volume.
I did search, but couldn't find anything. Any help would be appreciated.
|
|
Post 2 made on Thursday January 31, 2008 at 21:02 |
J.Todd Long Time Member |
Joined: Posts: | August 2007 481 |
|
|
There are some receivers that will do what you are asking.
|
J.Todd |
|
Post 3 made on Thursday January 31, 2008 at 21:38 |
Darnitol Universal Remote Control Inc. |
Joined: Posts: | June 1999 2,071 |
|
|
Yes, some receivers can do this, but as far as I've ever seen, these commands are always RS-232. That would mean you'd need an MSC-400 as well.
I welcome response from anyone who knows of a receiver that can take a discrete volume command via IR.
|
I'm a member of the Remote Central community, just like you! My comments here are my own, and in no way express the opinions, policies, or plans of Universal Remote Control, Inc. |
|
Post 4 made on Thursday January 31, 2008 at 22:38 |
marcus69 Long Time Member |
Joined: Posts: | March 2005 140 |
|
|
On January 31, 2008 at 21:38, Darnitol said...
I welcome response from anyone who knows of a receiver that can take a discrete volume command via IR. The Yamaha RX-Z11 has the ability to have 10 preset volumes via their extended IR codes. There are also 10 available volume recalls as well. There are a full 6 pages of descretes for that bad boy on Yamahas PAB site. Don't you already have them at URC??? They're in NEC format, but Yamaha has a "Hex generator" right there to convert them.
|
"People are very open-minded about new things -- as long as they're exactly like the old ones" Kettering |
|
Post 5 made on Thursday January 31, 2008 at 22:41 |
Darnitol Universal Remote Control Inc. |
Joined: Posts: | June 1999 2,071 |
|
|
Oh, I'm not part of the group than handles the database. That's a big database. I'd be suprised if any one person knew it all. But then... those guys ARE pretty smart!
Best regards, Dale
|
I'm a member of the Remote Central community, just like you! My comments here are my own, and in no way express the opinions, policies, or plans of Universal Remote Control, Inc. |
|
OP | Post 6 made on Friday February 1, 2008 at 00:30 |
bleemo Long Time Member |
Joined: Posts: | October 2007 19 |
|
|
Well, I did find a command in the IR database for my Denon called Vol.Preset(-20DB) along with some other DB levels so I'm assuming that will do the trick. Not sure if the installer put those in or if they come that way. Thanks.
|
|
Post 7 made on Friday February 1, 2008 at 08:14 |
Darnitol Universal Remote Control Inc. |
Joined: Posts: | June 1999 2,071 |
|
|
It comes that way. Installers can't add commands to a device. They're either there or they're not.
|
I'm a member of the Remote Central community, just like you! My comments here are my own, and in no way express the opinions, policies, or plans of Universal Remote Control, Inc. |
|
Post 8 made on Thursday April 24, 2008 at 00:10 |
Marcus, Would you happen to have these Hex codes? Looks like URC has not added this Z11 beast to their database as of yet.
WW
|
URC MX-900 x 2 URC MX-980 MSC-400 MX-6000 MRX-1 MRF-250 MRF-350 PSX-2 |
|
Post 9 made on Thursday April 24, 2008 at 00:33 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
Try these:
zone 1 -20db 0000 006D 0010 0020 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 0048 000A 001D 000A 0048 000A 001D 000A 001D 000A 001D 000A 001D 000A 0048 000A 001D 000A 001D 000A 06D5 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 001D 000A 0048 000A 001D 000A 0048 000A 0048 000A 0048 000A 0048 000A 001D 000A 0048 000A 0048 000A 0680 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 0048 000A 001D 000A 0048 000A 001D 000A 001D 000A 001D 000A 001D 000A 0048 000A 001D 000A 001D 000A 0680
zone 1 -40db 0000 006D 0010 0020 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 001D 000A 001D 000A 001D 000A 0048 000A 001D 000A 001D 000A 06D5 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 0048 000A 001D 000A 001D 000A 0048 000A 0048 000A 0048 000A 0048 000A 001D 000A 0048 000A 0048 000A 0680 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 001D 000A 0048 000A 0048 000A 001D 000A 001D 000A 001D 000A 001D 000A 0048 000A 001D 000A 001D 000A 0680
|
|
Post 10 made on Thursday April 24, 2008 at 07:43 |
Thanks, I was looking for pretty much all of the codes for this device.
WW
|
URC MX-900 x 2 URC MX-980 MSC-400 MX-6000 MRX-1 MRF-250 MRF-350 PSX-2 |
|
Post 11 made on Thursday April 24, 2008 at 11:08 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
FYI the codes I posted were for Denon which is, as far as I can tell, what the OP was looking for?
|
|
Post 12 made on Thursday April 24, 2008 at 11:35 |
Sorry for the confusion. I bought a new Yamaha RX-Z11 yesterday and the codes are scarce.
WW
|
URC MX-900 x 2 URC MX-980 MSC-400 MX-6000 MRX-1 MRF-250 MRF-350 PSX-2 |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|