|
|
|
Complete Control by URC Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
newbie with mx700 / fav / samsung h260F
| |
|
Topic: | newbie with mx700 / fav / samsung h260F This thread has 1 response. Displaying all posts. |
|
Post 1 made on Tuesday October 9, 2007 at 19:46 |
jonros Lurking Member |
Joined: Posts: | October 2007 1 |
|
|
gurus -
complete noob .. have owned the mx all of 1 hour (bought used) .. waded thru the tutorial with the editor and still can't do favs.
how the heck do i do it? when i hit the record button and then the hard keys i don't see the macro getting filled. i tested it by adding a delay - and that showed - but the 'channel' nos do not...
speaking of channel nos, how do input, say, 126-2 ? or 131-41? literally just that - 1, then 2, then 6, then 2?
thanks in advance.
|
|
Post 2 made on Tuesday October 9, 2007 at 21:28 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
Your macro commands need to point to the buttons from the device you have learned for the DTB-H260F....not the buttons on the FAVS page. Click FAVS, start a macro, click and open the DTB device, now click the digits you want, save, test, play around with delays, test again, save. As for - (dash) is it learned into the mx remote? if not learn it and use that in your macros as needed.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|