 |
 |
|
|
Complete Control by URC Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Sherbourn Preamp Pro Volume buttons
| |
|
| Topic: | Sherbourn Preamp Pro Volume buttons This thread has 8 replies. Displaying all posts. |
|
| Post 1 made on Tuesday October 2, 2007 at 16:15 |
BNC-RCA-RG59 Long Time Member |
Joined:
Posts: | November 2002
314 |
|
|
I got the Pro working for all signals rs-232 from the msc-400. Only thing is the Volume buttons. I did search and found Krell preamp with a fix. I tried it but that method didn't work for me. I am not sure what to adjust to try and fix this one.
So far I have rs-232 working properly for the Fireball and Sherbourn except the Volume up and down.
BNC
ps, It only moves one increment at a time and I can't seem to speed it up.
|
DON'T BE FRUSTRATED, GET INTEGRATED! (From a custom installer) |
|
| Post 2 made on Tuesday October 2, 2007 at 16:57 |
remotejr Long Time Member |
Joined:
Posts: | June 2007
206 |
|
|
Have you tried messing around with the ramp speed in the MSC-400 for the Volume up/down?
|
You win some, you loose some... |
|
| OP | Post 3 made on Tuesday October 2, 2007 at 17:14 |
BNC-RCA-RG59 Long Time Member |
Joined:
Posts: | November 2002
314 |
|
|
Is there some secret to finding where this is in the MSC? How do I locate the ramp speed setup?
BNC
|
DON'T BE FRUSTRATED, GET INTEGRATED! (From a custom installer) |
|
| Post 4 made on Tuesday October 2, 2007 at 17:33 |
remotejr Long Time Member |
Joined:
Posts: | June 2007
206 |
|
|
On the tree view of the MSC Editor, you should have your device converted to smart macros.
Select your volume up/down, double click on the RS232 code when it appears in the main windows.
Check the repeat while button is pressed box then play around with the ramp speed / ramp start.
The secret has been revealed...
|
You win some, you loose some... |
|
| OP | Post 5 made on Tuesday October 2, 2007 at 17:55 |
BNC-RCA-RG59 Long Time Member |
Joined:
Posts: | November 2002
314 |
|
|
Wow! Thanks, that did fix it. Should I take out the other crap I was trying?
BNC
|
DON'T BE FRUSTRATED, GET INTEGRATED! (From a custom installer) |
|
| OP | Post 6 made on Tuesday October 2, 2007 at 22:32 |
BNC-RCA-RG59 Long Time Member |
Joined:
Posts: | November 2002
314 |
|
|
I took out the other stuff added and it stopped working. So I had to put back in the before and after press on the mx-3000 volumes.
BNC
|
DON'T BE FRUSTRATED, GET INTEGRATED! (From a custom installer) |
|
| OP | Post 7 made on Thursday October 4, 2007 at 21:47 |
BNC-RCA-RG59 Long Time Member |
Joined:
Posts: | November 2002
314 |
|
|
Volume is still slow moving. How do I make it faster like the IR remote that came with it?
BNC
|
DON'T BE FRUSTRATED, GET INTEGRATED! (From a custom installer) |
|
| Post 8 made on Sunday October 7, 2007 at 00:08 |
remotejr Long Time Member |
Joined:
Posts: | June 2007
206 |
|
|
On the tree view of the MSC Editor, you should have your
device converted to smart macros.
Select your volume up/down, double click on the RS232
code when it appears in the main windows.
Check the repeat while button is pressed box then play
around with the ramp speed / ramp start. Ramp speed give you the ability how fast/slow to make the MSC-400 send the RS232 commands - Experiment with different speed to achieve your best result
|
You win some, you loose some... |
|
| OP | Post 9 made on Thursday October 11, 2007 at 01:18 |
BNC-RCA-RG59 Long Time Member |
Joined:
Posts: | November 2002
314 |
|
|
I made both ramp start and ramps speeds a 10 on both lines. That really makes it work like it's IR now.
Thanks, BNC
|
DON'T BE FRUSTRATED, GET INTEGRATED! (From a custom installer) |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
