If your speaker has two sets of binding posts it can be bi-amped, you would need a 4 or 2-2 conductor speaker wires and you should be good to go if you can set up the receiver correctly. If it only has one set of binding posts it is not designed to be bi-amped.
Some people swear by bi amping, some say it doesn't matter. Then you get into Bi-wiring where you run one pair of speaker wire to the speaker and hook it up to both sets of binding posts. Just remember that if you are going to Bi amp / wire to remove the shunts that connect the binding posts or you will have an issues.