I have a customer that is using a Dish 722 and side one has been converted to UHF in the setup menu of the Dish receiver so one of the kids can use the Dish remote control.

Mommy & Daddy want to use the T2C remote which is sinked with a RP6 which is connected to the front of the 722 with IR Emitters. I can not get the Dish 722 receiver to respond to any IR commands coming from the RP6 for side 1.

I have checked that there is output on the port designated for the 722 receiver, verified that the IR emitter is operating correctly but still no response.

Can a Dish 722 receive both the UHF from the Dish remote control and IR at the front of the receiver from the RP6?

Thanks for any help.