| Post 2 made on Monday July 20, 2009 at 13:04 |
Jon Welfringer Long Time Member |
Joined:
Posts: | December 2002
175 |
|
|
** PROBLEM RESOLVED **
For those that may search for a similar topic in the future, I'm posting my resolution here.
On the AVR-3805, all Zone 3 source selections must be performed by calling the Zone 1 commands. This seems very counter intuitive as Zone 1 would normally be thought of as being the "Main Zone".
As example, below are the commands to choose the SAT input for each of the available zones.
Main Zone = SISAT\r
Zone 2 = Z2SAT\r
Zone 3 = Z1SAT\r
Note that this is corrected with the AVR-3806 and newer models and all zone 3 commands are sent using the Z3 command (as would be expected).
| |
|
|
