Post 6 made on Thursday June 11, 2009 at 10:06 |
sydinstaller Active Member |
Joined: Posts: | February 2004 740 |
|
|
Hi John,
I tested by starting and stopping the up and down cycles. I.E. Start going UP, stop (press UP again) continue going UP (press UP again). That is 3x pressing the UP command in a row.
All was good.
My understanding is that if I did need to use a toggle the second button press (UP) would not have worked.
The same was true for DOWN.
That is the also the same under standing I got from reading your post.
Can you please clarify my logic.
Thanks
D.
|
|
|