On May 28, 2009 at 21:13, Ernie Bornn-Gilman said...
You say the Anthem has a pulsed on-off signal. You say "a," so it's one signal. You say on-off, so it's a toggle. One pulse to turn on, same pulse over same wire to turn off.
And yes, the Xantech would have to receive 12 volts as a turn-on signal, then have no voltage, then twelve volts as a turn-off signal, perhaps running the signal throught a CC12 relay.
Look at page 4 of the manual (figure 6)for the Xantech. It does exactly what you need to control Proceed or a Mark Levinson Amp with a more traditional 12v on for amps on and 0v for amps off.
