RC: RS232 for Goldline pool controller? (Post 2 by Bruce...

The following page was printed from RemoteCentral.com:

Forums > CI World > RS-232 & IP Control

View Single Message

Forum Search

Original thread:

RS232 for Goldline pool controller?

Post 2 made on Tuesday April 21, 2009 at 13:58

Bruce Sinclair

Active Member

Joined:
Posts:

April 2003
694

View Profile

Aux 4 press \x10\x02\x01\x13\x00&\x10\x03
Aux 4 release \x10\x02\x02\x13\x00'\x10\x03

Aux 5 press \x10\x02\x01\x14\x00'\x10\x03
Aux 5 release \x10\x02\x02\x13\x00(\x10\x03

Aux 6 press \x10\x02\x01\x15\x00(\x10\x03
Aux 6 release \x10\x02\x02\x13\x00)\x10\x03

These commands were taken directly off the output of a Crestron processor so the checksums and whatnot should be correct

baud 19200
data bits 8
stop bits 2
parirty none

straight thru DB-9 M to F cable all nine pins connected

good luck!

Bruce Sinclair CMB Integrations LLC DMC-E
"Those who are most critical, often have no real skills themsevles"

View Code

View the original thread...


©1998-2024, Daniel Tonks. All rights reserved. Contact \| Advertise Home \| News \| Reviews \| Features \| Files \| Forums \| Search