Hi,
Hi have a Sooloos system. I can talk to it using HyperTerminal¬¬ over IP.
I would like to use a Nevo to control the Sooloos using RS-232. So this is where the Xantech comes in.
I have got the IPRS232 working between 2 computers one using IP the other RS232. This bit is all good.
What I can’t work out is how to make the Xantech talk/listen to the Sooloos.
Here is an example setup.
The Xantech is set to 192.168.10.20
The Sooloos is set to 192.168.10.30 port 9011
The Remote/PC is connected to the Xantech via RS232.
Can any one help? The Xantech manual leaves a lot to be desired and tech support has not got back to me.
Thanks
D.
Last edited by sydinstaller on February 28, 2009 16:28.