Post 2 made on Thursday December 21, 2006 at 13:11 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
If you have exhausted these various discrete commands, you can do the following work around:
Most DVD players power on, in response to the Play or Eject button. Check your's with the original remote and see if it does.
If so, now you know the "state" is on and can turn it off with the power button.
So, the code would look like this roughly:
Send Play IR to DVD delay .30 seconds Send Power IR to DVD
You can then use this wherever you need to.
Dave
|
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|