Post 1 made on Tuesday May 8, 2007 at 00:06 |
Pack83 Lurking Member |
Joined: Posts: | November 2006 3 |
|
|
I am using a TSU9600 to control a RFX9600. This RFX9600 uses serial control for a Denon 4306 Receiver, an Elan V883 component Switcher, and hopefully, a Denon 1930ci DVD player.
I had no trouble controlling the Elan piece using the following settings:
Command: Output1 Input 1
Baud:19200 Parity: None Data Bits: 8 Stop Bits: 1
Send:1 Repeat until: 100ms
ACSII Command: '&V883,KEY,006\r'
No Problem for the Elan piece.
No Problem with the Denon Receiver:
Command: Power On
Baud:9600 Parity: None Data Bits: 8 Stop Bits: 1
Send:1 Repeat until: 100ms
ACSII Command: 'PWON\r'
I am having problems with the Denon DVD player. It appears I could use the hex format to control the DVD, but, I would think, since I am using one way communication that an ASCII set would work. Any help in this regard would be appreciated.
Attempted Command: Power off
Command: Power Off
Baud:9600 Parity: Even Data Bits: 8 Stop Bits: 1
ACSII Command: '!\r'
I feel like am missing some kind of prefix, and suggestions on the ASCII front?
|
|
TSU 9600 |
|