On October 23, 2006 at 13:17, 8ate8 said...
Not sure of the compatability of using the 250 and 150
together, but I've been told by URC that if you want to
use multiple RFX's, to wire them both to the phoenix connector.
Plugging one in and hard wiring the other won't work.
Also, why the need for both? They say the 250 is supposed
to have impecable range.
Dealing with the worst setup in th world. For some reason this guy's cable box (Scientific Atlanta) is given off an absurd amount of einterfernece. This guy wants to be able to control his cable box from upstairs in his bedroom (his cable is also connected to his upstairs tv) becaus he is too cheap to puick up a second box. Have had RF problems across the board with this setup which were only made better when the 150 was replaced with the 250. The 250 will not reach his bedroom well enough to control without problems, so we were going to place them on in hte bedroom as well. The 150 connected to the 250 did not work. Are you saying to connect both 250's to the base unit? Or 1 to the cat5 connects on the base unit and the other to the cat5 connects on the 250 antenae?
