Post 1 made on Tuesday February 20, 2007 at 16:23 |
neilaevans Long Time Member |
Joined: Posts: | December 2002 68 |
|
|
Hey all, I'm using an MX-900 and an MRF-250 and finding RF control very unreliable. It's clear the 250 is getting the signal (status light flashes, as do the flashers) but the equipment only responds reliably 70% of the time or so. It's worse with my new Integra amp, but the cable box has the same problem. I've verified IR works fine, and tested both channel 1 and A with the same result. Moving the flashers doesn't help either. So, is it possible that RF interference is corrupting the signal somehow - ie, it is received, but garbled?
I tested for interference on channel 0 and did find the status light blinking (although very dimly). I removed the antenna, and stopped seeing the interference on 0, but it had no effect on the reliability of RF.
Any quick replies would be especially appreciated (I'm on site now) but all help is great!
Thanks, Neil
|
|
|