Post 28 made on Tuesday October 14, 2008 at 02:43 |
Chris Dotur Lurking Member |
|
|
Yes, does seem that we're in a bit of a "trial" period, working out the kinks with things. The online Control Room tutorial says when you press and hold the dimmer button for 8 seconds, the LED lights should cycle up and down, but mine just cycled top to bottom, over and over.
Yes, when I get the switches working, I wonder how to program. Perhaps the single LED just flashes rapidly?
And the tutorial is also off from what the MX-980 program does for lighting, and what the MX-980 editor software window looks like when you're putting in the address codes. It's taking me a while to figure out how to save individual addresses to each different lighting dimmer/switch, and I have to use the IR database to save general buttons for each light, then hit "custom" to enter another window to assign an address. But I think after that, you have to individually drag and drop each command to the remote for each dimmer/switch, it won't automatically populate like the IR database will.
|
|
|