Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 2 made on Sunday November 13, 2005 at 15:06
JustPassing
Long Time Member
Joined:
Posts:
November 2005
127
On 11/08/05 18:59 ET, glenng2 said...
I bought two NevoSLs and the wifi component in
July. I was able to quickly ramp on the editing
software. The UI is very cool and I would rate
it as better than prontoedit. I was also very
impressed w/ the IR db (found discrete codes for
some devices that I couldn't find elsewhere, though
I wasn't about to add/modify discrete codes directly.
This appears to be resolved in recent firmware.)
On the con side, I spent endless hours dealing
with the flakey wireless connectivity, poor signal
strength and very limited battery life. Unfortunately,
when I contacted UEI in August I suspect they
were just getting to root cause on some of the
issues. The device has awesome capabilities in
a great form-factor, but when wireless is not
working you can't do the basics, like power on
a device or change a channel. I was also able
to get it to work w/ my dsm-320, when wireless
was working and was very impressed w/ the UPNP
capability. I didn't get enough wifi realiability
to test UPN media performance, but it appeared
to be acceptable.

I am very interested in hearing about specific
wifi and battery life experiences with the recent
firmware update. Please chime in. Based on my
remote experiences and research, I don't see anything
that measures up to NevoSL. The Harmony 890 is
a potential contender when it releases.

Sincerely,

Impressed, but gun shy.

It does improve the battery life in different ways... make sure you update the NevoSL software after reading the readme file and change the settings of the project for backlight too. Also if you are using WiFi checkout the power save mode. But make sure you follow the documentation/FAQ/KB...


Hosting Services by ipHouse