| Post 3 made on Thursday December 27, 2007 at 04:26 |
sydinstaller Active Member |
Joined:
Posts: | February 2004
740 |
|
|
What exactly do you need to know?
Once you source the 232 codes just punch them into studio.
The only bits of advice I can give are:
Test the codes with hyperterminal first (hex only, ascii wont work, you can D/L free software from the net)
Once you have the correct cable (straight or cross) and you can control the device from your PC then th rest should be easy.
The reason for testing on the PC first is that it is easier to fault find.
Make sure that you click Hex or Ascii in studio before you start entering code.
Hope this helps.
| |
|
|
