Your Universal Remote Control Center
Philips Pronto NG Family Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 22 made on Monday October 9, 2006 at 05:27
Long Time Member
July 2005
On October 8, 2006 at 12:59, Eigeny Oulianov said...
Sorry, I may not so clear in talking.

Commands like 0000 007D 0000 00A4 00A8 0047 000C 003B
... are for Daikin. Old Prontos may learn and replay them,
but NG can't learn and import. Now I make a convertor
for this purpose (I hope, NG _will_ play my synthetic

There are _many_ commands for Daikin -
3 modes (Auto, Cool, Dry) x 15 temperatures (18C-32C)
x 4 fan modes (low, med, hi, auto) = 180 commands, plus
OFF, wet and powerful modes (ignoring Swing, timers etc).
I cut odd temperatures and use the rest 96 command at
Crestron installations. Currently I prefer to control
Daikin via LON-RS232 interface - it contains 2-way interface
at this solution.

Commands like 0000 006F 010A 0000 0080 0040 ... (or erratically
learned (?) 0000 006F 00C3 0001 0081 0041 0010 0031 ...)
are for Panasonic air conditioners (at least, I have touched
them at Panasonic). These commands are too hard either
for Pronto, NG or for Crestron. May be, Panasonic make
some OEM for Daikin?

Hi Eigeny,

Is it possible to get the RS232 protocol for the Daikin via LON-232? Being a two way interface this would be a tighter solution. I have a 232 expander interface on the ELK M1 system, it uses an ASCII interface do the DAikin LON-232 support ASCII?

Appeciate any assistance.



Hosting Services by ipHouse