well since i have no idea what a toggle bit is i doubt that if crestron had something to handli it i wouldn't know about it. but thanks. to be honest with you i didn't know i was going to get htis much help so fast. here is the whole story. I need to get these RC5 codes into .CCF format (as that is the only other way crestron will accept codes from pasting otherwise it tells me "not enough data bits") i have tried the direct RC5 codes in the past and always no luck either learn with the remote or play as i'm doing now with other remotes then learn into crestron. not the most efficient but i found it works alittle better.
thanks again. as far as the makehex program i have never used it and i downloaded it yesterday after reading a few threads but after reading the readme file i don't know if that can help me right away.