On February 22, 2007 at 12:44, digifro said...
allthough i know that technically is the full command
But it isn't.
The full command requires the System number as well as the Command number. I assume 0x0B is the command number.
In the various CCF files I've downloaded, I see Linn CD players using system number 0x14 and Linn Preamplifiers using system number 0x10 and Linn Tuners using both system numbers 0x10 and 0x11.
You didn't say what kind of Linn device, so if the above doesn't tell you, guess and test and/or ask Linn.
i need to know how to do it using pronto edit NG.
I'll assume you know how to paste in Pronto Hex, so you just need the condensed Pronto Hex. For example if it is system number 0x10 it would be:
5000 0000 0000 0001 0010 000B
Replace the 0010 with the system number (with leading zeros to make 4 digits and without the x). Similarly replace the 000B with the command number.
The beginning part (5000 0000 0000 0001) is the same for all RC5 signals. (If you learned an RC5 signal, the first 0000 would be replaced by an encoding of the modulation frequency. But when you paste in an RC5 signal that number doesn't matter).
