Post 1 made on Monday January 8, 2007 at 05:51 |
Tamvegas Long Time Member |
Joined: Posts: | September 2005 24 |
|
|
Hi All, I posted a while ago on the erratic behavior of my TSU7000 when I put it in the cradle/base. Lock ups, screen going blank while buttons work, screen going grey and full lockup. Disconnecting and re-seating the battery with a couple second pause would bring it back. And the battery would never hold a full charge (even with a extra capacity one). Didn't get replies save for a couple folks with the same problem.
However, I have found what was wrong and want to let everyone know.
On a hunch I checked the output voltage of the power supply for the base cradle and found that it was putting out 17.38 volts rather than the required 12 volts DC. I replaced the power supply and everything seems to be back to working fine. No more flashing blue lights (overcharge warning?) on the base/cradle either.
So, if your remotes not holding a charge peoperly, acting erratic especially when inserted into the cradle etc. try checking the voltage on the power supply. A very cheap and easy fix.
Hope this helps someone.
Peace,
Tam
|
|
|