On March 21, 2007 at 21:51, johnsfine said...
If I'm reading the binary right and if I correctly understand
what "System code" means in ProntoEdit, then the second
list uses the same Customer Code as the first, but System
Code 18 instead of 2.
My software (DecodeIR and MakeHex, etc.) call this protocol
"MCE". If you want to generate ordinary Pronto Hex with
MakeHex, use MCE.irp and set device=2.17 for "Entertainment
group 1" and rerun with device=18.17 for "Entertainment
group 2". In both cases the "Code Number" in the HP document
is the function number in the MakeHex output.
Am I looking at this correctly???...
The information from the HP chart is presented in backwards binary.
The customer code (32785) is derived from D15-D0 in the third column.
The system code (2 or 18) is derived from D14-D8 in the 5th and 6th column.
The function code is derived from D7-D0 in the last column.
From where is the x.17 for the device number derived?