Thanks for this. Unfortunately, these do not work for the S-302. Power on/Standby has the following code for me (one of the few buttons along with volume up/down I actually managed to program!)
0000 006C 0000 0032 0082 0041 0011 0011 0011 0011 0011 0031 0011 0011 0011 0031 0011 0011 0011 0031 0011 0011 0011 0011 0011 0031 0011 0011 0011 0011 0011 0031 0011 0031 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0031 0011 0011 0011 0031 0011 0011 0011 0031 0011 0011 0011 0011 0011 0011 0011 0031 0011 0031 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0011 0031 0011 0011 0011 0011 0011 0011 0011 0011 0011 0031 0011 0031 0011 0011 0011 0B1E
These look very similar to yours so I did try to identify the differences between POWER ON and OFF in your hex codes and modify my hex code accordingly, but that didn't quite work as intended (this may not be an intelligent approach, but given that I know very little...seemed logical to me!).
There is an AUX button that cycles through AUX inputs. If I had that one (actually the relevant descreet codes), I could at least switch between devices and solve part of my problem. I would still need the remote for the S-302, but at least I would be able to operate Sky HD, BlueRay, etc. without touching 2 remotes...
Again, thanks for your efforts.
Last edited by twil01
on January 6, 2009 14:37.