Oh mines a 3000 as well, just in case Philips wanted to know.
You DONT need to desolder the screen and remove it.......its the ONLY ribbon that is glued to the top front of the glass screen....the one that connects to strips running around the touch screen....just take a tiny flat head and push down on each part of the strip where it connects to the glass. Not the ribbon that goes under the glass......its the ribbon that is glued right to the glass at the top right of the screen.
Give it some pressure with the tiny flat head sharp edge against each connection on the glass....pushing it against the glass. The bad connection is in there...
Last edited by canuckguy
on August 31, 2007 02:12.