Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 143 made on Saturday October 15, 2005 at 22:27
CV27
Long Time Member
Joined:
Posts:
November 2004
146
I gave the "rub the contacts" a try today. I was able to get the 5 screws out, the top portion out. But I wasn't able to completely remove the greenish plastic frame around the LCD. I could not lift the right hand side, the one with the 5 buttons.

Regardless, even if I could have, I'm puzzled as to what contacts I'm supposed to rub. On my TSU3000, I can't find the four connection points of the ribbon cable mentioned by PeraV. On mine, the ribbon seems to be permanently connected to the top surface of the LCD plate; the ribbon then wraps around the plate and goes underneath.

So, which end of the ribbon is supposed to have the connection points? The end connected to the LCD plate, or the end (repsumably) connected to the PCB?


Hosting Services by ipHouse