Your Universal Remote Control Center
Philips iPronto Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 1 made on Friday January 23, 2004 at 13:13
Lurking Member
January 2004
I'm using my iPronto with the Samsung STR-165 DirecTv receiver. After programming the channels, I've noticed when the iPronto fires off the code to the receiver, some numbers repeat, thus giving me eroneous channel selections.

It never happens when the channel selection is a single digit.

It happens about 25% of the time when the channel selection is two digits.

It happens about 60% of the time whenthe channel selection is three digits.

When it's a multiple digit channel selection, it varies on which digit gets repeated. Sometimes it's the first, sometimes the second, etc.

I've tried inserting delays, but that is not the problem. Every other button programmed using the iPronto Samsung codes seem to work fine! Anyone had a similar experience or could offer a suggestion? Thanks!

Hosting Services by ipHouse