Barry, the Plus Projector's "Power" button command was originally taken from the IR database on the RC. After it didn't work, I Learned the command from the original remote. When i later viewed the learned action code, it said "Learned IR" in the command box and when checked in the editing box code read as follow:
900A 006D 0000 0001 8615 14EB.
To check for cleanliness, I made, and will check tomorrow, a test "power" key with cleared data so to just learn "power" command from original remote for accurate reading. Will try that among other things at customers house.
I did review yours and others files as suggested on decoding hex, ir, timing etc.. Though all are great contributions and I really want to expand my knowledge in this field, and not to forget make my one press Macro "All On" work, but my anxiety level started to rise somewhere in that hex timiing 0's and 1's decoding calculation seminar. I think I would rather try to land the Space Shuttle at a minute before splashdown, with the only instructions coming from an old Apollo Mission's Manual that happened to be floating around the cabin than trying to comprehend, calibrate and impliment and execute timed hex decoding sequences. I felt like i was living a scene from the movie "A Beautiful Mind". I will try to make another stab at it in the near future so to get the "whole picture" and maybe it will look more familiar a second third time around. There certainly was alot of valuable, seemingly 'CONFIDENTIAL', information there that will come in handy in the future. I appreciate your helpful guidance leading me there...I will drink there later.
No matter how I tried this 4x sequence, either by itself, repeated 10 or 25 times with or wothout delays before and after command the curtains only nudged open and then stopped, nudge and then stop depending on how mant conscecutive "4x sequences" i placed in series. If placed 2 "4x sequence" commands in series curtains start and stop 2 times in a split second. Though annoying, it would eventually jerk its way open (and that my be an option for the client) if given enough commands. I did follow you with the 'add 12 to the 4th set for every repeated group of 36 that followed. Once in the editing ir position, I tried 0120 as 4th group and repeated the 36 series 10 times. Then pressed "ok" buttton to add, it came back saying not a valid rc code thus not entering. it seems no sequence above your 4x (0048) could even be edited or added in. 1, 2 and 3xs were ok just nothing over 4. I could be wrong but checked it several times. One other thing to note, when you use the rc own database for button's 'command' selection under each device mine never has any codes when checked under the corresponding window. Is this correct? I suspect only learned codes will show up in that box. Thank all for continuous help. I will check somemore of your ideals and suggestions tomorrow. Hopefully client will have his computer ready at site so to download rc icf.. This back and forth is killing me. Also ask for and received some codes from manufacturer. Besides not knowing what to make of them (I know go back and read hex files), there wasn't any codes for the "power" button. Oh well, I got other issues......popcorn
