Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 10 made on Monday October 16, 2006 at 11:13
johnsfine
IR Expert
Joined:
Posts:
September 2002
5,159
On October 14, 2006 at 08:51, calston said...
Thanks for the input but unfortunately this does not work!

The Pronto Hex quoted at the top of this thread would not do the right thing for a long button press.

I don't recognise the signal, so I don't know whether it was learned slightly wrong or very wrong. If it was slightly wrong then the correct signal is

0000 006D 0022 0002 0155 00AF 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0017 0016 0017 0016 0017 0016 0017 0016 0042 0016 0017 0016 0017 0016 0042 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0042 0016 0042 0016 0017 0016 0042 0016 0017 0016 0042 0016 0600 0155 0057 0016 0630

In a regular Pronto that signal could be used with a 5 second press as long aas the signal was the only action on the button.

I don't know what an iPronto does with long button presses.


Hosting Services by ipHouse