Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 8 made on Sunday May 18, 2008 at 21:27
Grimmace
Long Time Member
Joined:
Posts:
February 2003
156
Yes, there is, or at least an equivalent. The PS2 Standby/off is treated as the PS button on the PS3. The other non PS2 buttons are as follows

PS2 -> PS3
Repeat -> Blue
Program -> Green
Shuffle -> Red
A<->B -> Yellow
Standby/Off -> PS

Every PS2 IR code is mapped to a PS3 button so all (51) of the PS3 buttons work. That is why the IR2BT and PS3IR-PRO are full function IR to BT devices. All of the PS3 BT remote buttons map and work with these devices. I think a PS3 Excel sheet was posted on RC (I think it is here, but you would know) and you will see the mappings. If not, I can send it to you, it has the PS2 to PS3 mapping and the IR codes used from the Sony 26.73 (DVD) and 26.218 (PS2) that actually make up the PS2 remote codes. All of the IR codes work, I am just trying to make a macro to turn it off automatically instead of holding the PS (standby/off) myself and then hitting X twice. I have asked if the creator would add the Sony discrete DVD Off (Command code 47) to the list of codes and have that run a turn off macro via BT. The simpler IR to BT converters do not have all of the codes.

The two main full function IR to BT seem to be (I'm sure others are out there), and I think they use the same PS2 to PS3 mappings. I am not trying to say anything about them (selling), just that they are there.

http://www.ir2bt.com/
http://www.schmartstuff.com/

So, can someone help me out?

Last edited by Grimmace on May 18, 2008 21:39.


Hosting Services by ipHouse