1) When you upload your .ncf file from the remote the "ir codes" that were set for the hard buttons revert to the first "ir code" built into that device's datebase! Yet this dos not happen if the device is the default one of "Cable/ABC/0030"
Work around: Learn the "IR codes" from the devices remote, as they don't change when Uploaded.
2) The "Device Overview" page can still have "Links" to other device's buttons that make up macros but they are not saved right! If the file is saved, and you exit NeoEdit, when you open that .ncf file back up, the "links" and "jumps" are gone! But if you Download the .ncf file to the Neo before you close the file, the marcos will work.
Work around: There is none that I can find! Just put the jumps and links back in place if needed.
3) When the batteries are taken out, the TIme and Date is lost! So is the Contrast settings! Yet the timeouts for LCD/Backlight are NOT!!! Also, when the .ncf file is Downloaded, the Time/Date is not! I think this is a EASY fix, if they can have the Lcd and Backlight times saved, the rest can be too!!!
Work around: Never ever replace the batteries :)
))The Hard Buttons I listed in #1 seem to be only the "Ok" and "Arrow" buttons
This message was edited by allamand on 12/21/01 19:29.53.