Post 3 made on Monday May 23, 2005 at 16:20 |
akirby Super Member |
Joined: Posts: | March 2004 4,640 |
|
|
Try increasing the inter-device delay for the component(s) that are having problems. Sometimes when a device sees a command for another device it is temporarily "blinded" and misses the command for it to power on or off. Increasing the delay gives it time to recover and respond correctly. Since it fails sporadically try increasing it by 100 or 200 ms at a time. If that doesn't fix it then it could be a problem with the IR repeater. Is the satellite receiver the furthest away from the emitter? Or do you have individual emitters vs. flood emitters?
|
|
|