On 1138586749, Bierboy said...| | Yes, you can. You just need | to make sure the rotor is on in that activity | and included as a passthrough device. Then assign
the same channel numbers that you have in your
TV tuner keypad to the rotor keypad in the "change
or add buttons for this Activity" page of that
activiity.
I was a little leary of doing this but it works great. Some of the antenna positons are shared, such as most of the Buffalo, 2, 4, 7, 23, 29 and 43 whereas 49 needs a little nudge and Toronto is in the opposite direction. Matching the CM positions to the tuner on the direct access keypad allows one punchthrough for both. But when I don't want to move the antenna, I simply use the channel up/down button to change channels on the tuner and the antenna stays in place. Thanks for the help.