I followed the advice of posts here and uploaded my movies as a .csv file. I setup the remote to change discs based on this also. My display does not get cleared from the screen after the disc is selected. If I use the following settings it works most of the time:
inter-cmd delay: 500ms
Before sending disc number: display right direction
After sending disc number: select down direction (to add delay) down direction (to add delay) down direction (to add delay) display display
The problem is the remote is very slow with this 500ms setting (also using RF on this device). I set it to 0 ms and it works great for using the dvd but there is not enough delay after the selection of the disc number and the dispaly cmds to remove the display menu. I am always stuck with the second menu not the first so the first display command is taken. Is there a way to have the remote wait a second or so then send display twice without messing up the inter-cmd delay on all the other dvd functions? I am curious to hear exactly what others with the 880/890 have setup in the way of cmds AND delay times to get rid of the display every time.
Someone mentioned a way to wait 20 seconds then send a power-off command, I wonder if this functionality can be used to tweak this problem? I could not find how to do that via search and I've read all the posts about this I have come across in the last few days.
