Your Universal Remote Control Center
RemoteCentral.com
Harmony Remote Controls Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Saturday November 15, 2008 at 17:55
I. N. Fred
Lurking Member
Joined:
Posts:
November 2008
1
I have been looking for a remote for the Vision W for a while. They seemed to have disappeared off the face of the earth. I've looked on ebay, "anything but ipod" forums, JP1 forums, this forum and googled like crazy for codes or a remote for the W. I have a Harmony 550 and asked Logitech to upload the codes for the W. They created the digital music server you mentioned in your posting. You are correct that it does not work. It lists all the right buttons but they don't do anything. I let Logitech know they didn't work and they responded I would have to get the hex codes from Creative and send them to Logitech. I contacted Creative and requested information for the codes or someplace where I could purchase the remote. They sent a boiler plate email stating my W was out of warranty and they could not offer any support. There is a code set available for the Harmony that works with part of the W. When you select the device for Harmony put in the description "Creative Zen M". Some of the codes from the M will work with the W. The pause and play work, the volume works. The fast forward and rewind function as the next/previous track keys. The enter works and the up/down keys work. Unfortunately you cannot fast forward/rewind or access the menu. I had mentioned to Harmony that the Zen M codes almost work but I only received the reply about the hex codes mentioned above. Please post any results you get in locating codes for the W. One last thing, make sure to turn on the IR feature of the W. By default it is turned off.


Hosting Services by ipHouse