Post 10 made on Thursday July 1, 2004 at 19:58 |
Not all, but many...
1,1-47 match function on my set. 1,50-52 no function (should be inp1-3) 1,64 match 1,74 match
1,81 is twin picture (this set has twin picture side by side, not p-in-p)
1,83 is freeze (function in twin picture) 1,87-88 match 1,110 dolby virtual toggle 1,160 view mode toggle 1,169 no function here 1,177-179 match (a,b,c,d) fav keys 1,211 no function 1,244-248 match 1,254 no function
17,9;58-60 not sure about these (may not have been in right mode when I was testing all dev17 codes)
17,74-75 match (discrete power control) 30,129 match (input5 discrete, DVI on my set) 30,139 didn't notice a function here (what is LUMP?)
Here's some additional codes I noticed doing something during my testing (I'm only listing codes that don't have a button on the OEM remote):
1,49 - a kind of service menu/display (diff than 1,64) 30,199 - "public" menu ('nother service menu of sorts)
30,212 - some kind of test mode, causes display to flash between ANT-A ch4 and garbage. must power down to standby to get out of this.
1,119 - displays AV MODE STANDARD at bottom of screen and places s [K] (in a box) on left side of screen. emitting another 1,119 will remove the [K], but it will re-appear when coming back out of standby. must do complete system reset to get out of this mode. also -- going into CARD mode will display a diagnostic menu when the [K] is present on the screen.
// Dean
|
|
|