I've futzed with this on my own for a couple days and now I'm admitting defeat and hoping someone here can put me out of my misery.
I have a Fisher stereo that I'm controlling with a serial IR Blaster using Lirc. I've managed to get this working nicely.
My problem is the lircd.conf file that I found for the remote has only one button to change the AV input (AV2). The stereo has two buttons, another for a second input (AV1). What I'm trying to do is add another button for the AV1.
I wasn't able to get IRW in Lirc to recognize the codes from the remote using PVR150 receiver I have. So I gave up on that. I have a TSU3000 and was able to get the Pronto codes using the ProntoEdit NG software.
Sooo...
lircd.conf (clipped)
begin remote # Radio- Stereo set - Fisher Remote Contrl REM S3 name stereo bits 15 flags SPACE_ENC eps 25 aeps 100
header 9117 4338 one 665 446 zero 665 1574 ptrail 665 repeat 9068 2124 pre_data_bits 16 pre_data 0xC33C post_data_bits 1 post_data 0x0 gap 39682 toggle_bit 0
AV2 0x0000000000002ED1
And, Pronto Codes learned from using TSU3000 and ProntoEdit
AV2 - 900A 006D 0000 0001 3CC3 45BA
Can someone give me some guidance on how I can convert the AV1 Pronto code into an equivalent Lirc code.