Thanks for the information!
I'm not sure I can get hold of one of those universal RCs here is Asia.
They have alot of off-the-shelf universal models that I can grab & program.
The only issue is I do not have the original remote controller since it has been misplaced.
Can I use any software, like the ones suggested in this post, to program those URCs?
TIA!
On August 15, 2007 at 07:27, Kupakai said...
You can get a much less expensive One for All URC-8820,
URC-6690 or Radio Shack 15-100, and they will have a built
in setup code (TV/0834) that should give you some of the
keys on that link (power, arrow keys and enter). You will
be able to add the other functions by reprogramming the
keys on the remote using advanced codes. I don't think
there will be a way to do the right and left click this
way though.
I can show you how to do this if you are interested in
going this route. It involves a lot of punching in codes
on the remote, or getting a JP1.x cable to connect the
remote to the computer to program and upload a upgrade
file to the remote.
