We have plenty of other sources of information telling
us the correct device number is 4. So I'm sure the device
number is not the problem. Your results from MakeHex
are also correct. So the problem has to be in how you
used those Pronto Hex strings after getting them from
MakeHex.
Ok. This is the way the HEX codes are getting to my PDA with
Total Remote:
I copy-n-paste all the content of myhexcodes.txt in the input
box from IRPanels which generates a CCF file. Then i upload
the CCF to my PDA and use it.
After pushing button 8 (which is function 8) no action on the TV. To
check if my Total Remote Software is doing its job, i edited the CCF
with ProntoEdit4 and put the learned code on Button 1. After reuploading
the CCF to the PDA, the Button 1 powers on the TV correctly.
Hm... could there be a problem with Total Remote and NEC1 protocol?
I'll try 2 other PDA softwares that are reading CCFs and tell my results
(something like TV remote controller, have to google around a bit).
I the problem is not my PDA (Vodafone VPA Compact II), but i think if the
total remote software correctly learns and sends learned signals, it should
also correctly send my own generated signals :)