Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 62 made on Friday May 16, 2008 at 16:53
gearjam
Lurking Member
Joined:
Posts:
May 2008
1
I ran into the same problem and here is the fix: Using the Direct TV white remote, slide the slide to the Direct TV setting and then slide it to the TV position. Pushing the mute key and the select key at the same time and holding it till the light flashes two times above the TV slide enter the code 991 and then hit the power button and enter 1 and using the channel key push it up one time and push the power button then repeat till the TV turns off. Once the TV turns off then push the select button and slide the slider back to the Direct TV setting and your TV now is programmed into the remote control. Using this process it took less then two minuets to find the correct setting. Note you can use this process on any TV and instructions can be found within Direct's mannual.

Note that this will not program the DVD player.

Good Luck
Robert R Baker


Hosting Services by ipHouse