Post 5 made on Friday January 16, 2009 at 22:31 |
mistapuggs Lurking Member |
Joined: Posts: | January 2009 6 |
|
|
Gents,
This is a device that I also need a little help with. I have downloaded makehex and I think after poking around for a few hours now that I am finally beginning to understand where the device and function numbers come from. So, I now have a few questions...
In the example above the info from marantz is 11 12 01 for power on, with 01 being the function number, right?
So if the code I am trying to use is just 11 16 then am I looking for function 0?
Also, this is a Vol+ code which you would think would be easy enough to just learn (and I have) but the problem is when you learn a code on a UR mx900 it won't automatically repeat when you hold the vol button on the remote. Is there a way to change that in the raw hex code? I noticed that IRtool has separate fields for "one time" and "repeating" so I was hopeful that it could be done but am also clueless as to how to pull it off.
Any help?
Thanks a ton
|
|
Ryan Davis |
|