On 12/11/02 12:50.27, John Pechulis said...
That's actually 1020 source card, 1010 dual zone
card.
The 1010 card is no longer made, it is replaced
by the 2010 card and is not compatable with the
older 1010 version card or older firmware. You
can find these older cards, as a matter of fact,
I have 2 in stock if you need them.
Sorry about the model numbers, they all start blending together! I have plenty of the 1010 cards (I currently have 3 and will be purchasing 4 more in a couple days), but was wondering what the advantages of the 2010 are.
No. Via! Tools is for programming VIA! panels
and the keypads. You will need the MCU-Pro software
to program the HD chassis. You will also need
the serial card to do this. By the way, to utilize
VIA! Tools software, and download to the Panels
and keypads, you need the programmer.
This is from
http://www.haguirre.com, the tech web page run by one of Elan's engineers: "The scope of the VIA Tools has expanded to include other products from ELAN. The software currently supports products like the Z-630, HD, Z-880, Z-Pad, SC-4 and SR-1. VIA Tools is also incorporating products from other manufactures in an attempt to easy the configuration burden on installers."
Is the programmer that you need the same as the automation card or is it another dealer only item?
Thanks for the information!
CJ
