Post 14 made on Tuesday July 15, 2003 at 18:27 |
Warren Long Time Member |
Joined: Posts: | November 2002 264 |
|
|
The diode used is not all that critical since you are dealing with a very low voltage and current.
Most any silicon diode rated at 1 amp or more would be fine... the LED current draw is well below that range.
Radio Shack part # 276-1144 will work fine if you don't want to go looking anywhere else.
You can buy them much cheaper by looking around, but if you only need a couple that probably isn't worth your time.
|
|
|