On 01/11/04 00:03, roddymcg said...
Has anyone done any trick set ups with the Ct-610.
I am going to start programming a project with
3 CT-610s and 14 CK1.2 Keypads. The 610s will
be in an hub with a Sony Cd changer, Sony DVD
player, and several Dish 301's . I have the keypad
part of it figured out. Running the DVD, CD player,
and the sat boxes seems to be pretty straight
forward.
I've run a few with AMX control systems... The RS232 is quite robust
What I am not quite sure of is whether I can control
the B&K and the DVD changer via an infrared receiver
located at the display using a TSU 6000, or will
I have to make it a two step operation. Point
the pronto at the Display to make the local adjustments
and using the keypad to operate the DVD signal.
The 6000 can easisly operate local components and the CT610 system. The Keypads have IR receivers built in or you can add standard Xantech style IR receiver near the Tv's.
There are 3 different locations with a Plasma,
a 5 disc changer, Sat box, and a Denon receiver.
Hopefully I will be able to just point the remote
at the display and it will be able to access the
DVD changer.
Should Not be a problem
If anybody has any insite or suggestions, they
would be most appreciated.
Roddy
