On 02/11/04 00:59, james budow said...
Do I get a speciel remote from
radio shack to program remote with the hex codes
also just hung a zenith plasma the direction says
to plug my remote into the plasma what type of
remote do i plug in? then where do i get hex codes
for remotes discrete etc. please help
thanks james
I do not believe radio shack has any kind of remote that will learn hex?
You will need a pronto or RTI Type remote to learn hex, but these remotes already have enormous IR library’s available and I am sure your Hitachi is in there somewhere. Further, I do not know of any remote that plugs into any type or kind of plasma directly, your are probably reading in the manual about the RS-232 interface, that can be used optionally to control the plasma. You will need one of the more expensive remotes to do this wherein an interface will be needed so that the remote can communicate via rs232. I would start by reading some of the reviews of the different remotes that are discussed on this site.
[Link: remotecentral.com] and then move on to this page
[Link: remotecentral.com] Good Luck.
