Post 5 made on Sunday February 29, 2004 at 13:38 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
Those logos that are clipped are probably part of a Marantz ccf. The Marantz has more height, and when opened with the Pronto program, the bottom is clipped off. (When a Pronto ccf is opened in the Marantz program, the Pronto artwork is CENTERED in the screen, so if you open a Pronto artwork, then store it, with the Marantz program, it will be lower on the page when you open it with the Pronto program again.
Oh, the wonders of programming both types of remotes and trying to have individual component ccfs that I can use for both brands!
If you want to "retrieve" the bottoms of those logos, you might try grabbing them and raising them. It could work! Or go to Marantz.com and download their Touch Screen Setup. In that program, you will see the entire logos, and you can manipulate them up on the panels or onto the higher portions of new panels, then store them and open them in your Pronto program.
|
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|