Post 3 made on Wednesday July 28, 2004 at 11:16 |
jetskier Founding Member |
Joined: Posts: | December 2001 4 |
|
|
While I'm at it....
Since my keypads are programmed now with the Z-090, I programmed my URC-8810w remote to work the source and volume keys on the elan system. Apparently the keypads are passing the ir signals to the system 6 rather than initiating the ir signals programmed in the keypad. How do you get the incoming ir signal to be processed in the z-100/150 before it passes to the system 6? I thought if I programmed the keypad buttons on each source, I could create one device on my remote to control the keypad and it functions in any mode. I programmed a macro on the DSS source to select Zone x on my Z-880 video switcher, then select the source for the DSS. Not so with the remote when I initiate the DSS device key.
|
|
|