Post 6 made on Wednesday August 31, 2005 at 13:50 |
roddymcg Loyal Member |
Joined: Posts: | September 2003 6,796 |
|
|
When setting the switch to 22k, makes sure you feel a click as you are adjusting the screw. Then make sure it is right on the mark, this got me recently. But a quick call to Spaun ( great support ) and all was well.
I also always bypass the multiswitch first and go straight to the box just to make sure signal is strong on A,B, and C first. Once I no I am good there then I hook everything up to the Spaun.
Good luck
|
|
When good enough is not good enough. |
|