In the manual for the Somfy RTS interface the say you can use ir
C. INFRARED OPERATION
1. The RTS Interface is compatible with Somfy’s Single & 8 Channel transmitters. Connect an infrared sensor to the
bottom of the Interface control board.
2. Each individual motor is activated by first aiming the transmitter at the sensor and pressing the desired unit number
pressing the UP or DOWN buttons. Press the center button to STOP the window treatment at any time.
3. NOTE: There needs to be a 1.5 second delay between successive directional commands or address ranges.

[Link: somfy.com]

The Shade guys didnt leave an IR Remote for my programer in the field. So if anyone has the Hex that would be great. Very much apreciated. I did try the Hex that was in the Mega code14 list but it didnt work.


Thanks,
Dave