On 01/25/03 08:39, Craig540 said...
I have tried that and the HD100 takes any learnd
codes from the T60 remote channel 1-3.
If you had changed the remote address on the T60, the right way, then this shouldn't happen. So lets go through the steps;
On the T60
1. Go to the DIRECTV MENU
2. Choose MESSAGES & SETUP
3. Then SYSTEM INFORMATION
4. Scroll down until you see REMOTE ADDRESS
5. While pointing the remote away from the receiver, press and hold TIVO & PAUSE until the red light goes on
6. While pointing the remote towards the receiver, press 2 or 3, which changes the remote
7. Now to change the receiver, hit the right cursor arrow, the remote address on screen should change.
